Kenyan Chrysoprase Plugs - 26mm (1")

Notify me when this product is available:

Double flared, flat-faced plugs carved from a Kenyan material with the unique chrysoprase green color and contrasting white veining/inclusions.

I think the composition of this material is a little more complex than just the "chrysoprase" it is marketed as because it is softer than a solid chalcedony with wildly varying hardness in some areas. Very challenging to carve! It does have a similar green color to the more familiar Marlborough Chrysoprase from Australia, but is opaque and takes a matte finish. The different hardnesses are visible on the surface, where they create a texture between softer low lying areas and veins of harder material.

  • Size: 26mm (1")
  • Wearing width (between the flares): 11.5mm
  • Flare Size: 1.6mm

Related Items

Sizing Chart
Size chart includes the sizes we make, and default flare size & wearing lengths.
We are happy to make pieces in odd sizes or with custom flares or wearing lengths.
Jewelry Size Flare Size Wearing Length
1.0mm (18g) 1-1.5mm 9mm
1.3mm (16g)
1-1.5mm
9mm
1.5mm (14g)
1-1.5mm
9mm
2.0mm (12g)
1-1.5mm
9mm
2.5mm (10g)
1-1.5mm
9mm
3.0mm (8g)
1-1.5mm
9mm
4.0mm (6g)
1-1.5mm
9mm
5.0mm (4g)
1-1.5mm
9mm
6.0mm
1-1.5mm
9mm
6.5mm (2g)
1-1.5mm
9mm
7.0mm (1g)
1-1.5mm
9mm
8.0mm (0g)
1-1.5mm
9mm
9.0mm (00g)
1-1.5mm
9mm
10mm
1-1.5mm
10mm
11mm (7/16")
1-1.5mm
10mm
12mm
1-1.5mm
10mm
13mm (1/2")
1-1.5mm
10mm
14mm (9/16")
1-1.5mm
10mm
15mm
1-1.5mm
10mm
16mm (5/8")
1-1.5mm
10mm
17mm (11/16")
1-1.5mm
10mm
18mm
1-1.5mm
10mm
19mm (3/4")
1-1.5mm
11mm
20mm (13/16")
1-1.5mm
11mm
21mm
1-1.5mm
11mm
22mm (7/8")
1-1.5mm
11mm
23mm
1-1.5mm
11mm
24mm (15/16")
1-1.5mm
11mm
25mm
1-1.5mm
11mm
26mm (1")
1-1.5mm
11mm
27mm (1 1/16")
1-1.5mm
12mm
28mm
1-1.5mm
12mm
29mm (1 1/8")
1-1.5mm
12mm
30mm (1 3/16")
1-1.5mm
12mm
31mm
1-1.5mm
12mm
32mm (1 1/4")
1-1.5mm
12mm
33mm (1 5/16")
1-1.5mm
12mm
34mm
1-1.5mm
12mm
35mm (1 3/8") 
1-1.5mm
12mm
36mm
1-1.5mm
12mm
37mm (1 7/16")
1-1.5mm
12mm
38mm (1 1/2") 1.5-2mm 13mm
39mm
1.5-2mm
13mm
40mm (1 9/16")
1.5-2mm
13mm
41mm (1 5/8")
1.5-2mm
13mm
42mm
1.5-2mm
13mm
43mm (1 11/16")
1.5-2mm
13mm
44mm (1 3/4")
1.5-2mm
13mm
45mm
1.5-2mm
13mm
46mm (1 13/16")
1.5-2mm
13mm
47mm
1.5-2mm
13mm
48mm (1 7/8")
1.5-2mm
13mm
49mm (1 15/16")
1.5-2mm
13mm
50mm
1.5-2mm
13mm
51mm (2")
1.5-2mm
13mm

Wearing length is the area of the jewelry that fits inside your piercing. 

Overall length (sometimes confused with wearing length) is the total measurement of the jewelry from face to face, including any additional flare or face area.

Diagram of jewelry styles with wearing length marked in green and overall length marked in red.

1. Flat face double flared plug. Wearing length is measured from the inside of the flare edges. Overall length is measured from face to face.

2. Convex face double flared plug. Wearing length is measured from the inside of the flare edges. Overal length is measured from face to face.

3. Flat face double flared plug with flat flares. Wearing length is measured from inside the flare edges (the piercing cannot rest on the flat flare areas). Overall length is measured face to face.

4. Trumpet flare style plug. The dotted line denotes where the wearing surface ends on the front, because the larger portion of the slope cannot fit inside the piercing. Wearing surface is measured from inside the rear flare edge to the area on the front flare with the same diameter measurement. Overall length is measured from face to face.

5. Sloped single flare plug. Wearing length is measured from where the slope of the flare ends to the end of the plug. Overall length is measured from face to face.

6. Top-hat style single flare with convex face. Wearing length is measured from the inside flare corner to the end of the plug. Overall length is measured from face to face.

7. Top-hat style single flare with curved rear. Wearing length is measured from the inside flare corner to the beginning of the curve (the piercing cannot rest on the slope). Overall length is measured from face to face.

8. Top-hat style single flare with groove for an o-ring. Wearing length is measured from the inside flare corner to the groove (the piercing cannot rest on the groove). Overall length is measured from face to face.

9. Labret (round or oval) with a standard concave t-back. Wearing length is measured from where the wearing shaft meets the wing to the end of the flat portion (the piercing cannot rest on the slope).

Overall length is always longer than the wearing surface because it includes other sections of the jewelry that do not rest inside the piercing. If you are ordering a piece of jewerly and you specify an overall length instead of a wearing length, your jewelry will not fit properly. Order using "overall length" at your own risk. Knowing your ideal wearing length, which can change as you stretch your piercings, ensures you're able to order jewelry that will fit well from every vendor, every time.